Get Thesis Now !

PROJECT TOPIC:  DESIGN AND CONSTRUCTION OF AN ELECTRONIC BILLBOARD(EBB)
Department:  System Engineering
AMOUNT:  10,000
FORMAT:   MS WORD
PAGES:  89
 
Get Complete Work

Abstract Preview

ABSTRACT

With the advent of technology, most tasks undertaken by man have now been overtaken by semi-conductor devices applicable in the areas of communication industry.
In industrial, commercial and recreational establishment, there is always the need to reach the public. The faster this is done, the better.
In this project: design and construction of an Electronic Bill Board (EBB), which is a display device that converts electrical signals transmitted from electronic devices into optical signals using Light Emitting Diodes (LEDs). 
The EBB saves time, gives better visual effects and attraction, where it is used in adverts and other forms of attractive and urgent information dissemination. 

TABLE OF CONTENT

Title page 
Certification 
Dedication
Acknowledgment
Abstract
Table of contents

CHAPTER ONE
1.1 INTRODUCTION
1.2 A brief on EBB
1.2.1 What is EBB?
1.2.2 Programmed pattern, programmed output sequence (PPPOS) EBB.
1.2.3 Adjustable Sequence, Adjustable Patters (ASAP) EBB.
1.3 Objectives/Purpose/Need of the System

CHAPTER TWO
LITERATURE REVIEW
2.1 Introductions
2.2 The Concept of Computer System as Relating To the EBB.
2.3 Relevance of Digital over Manual

CHAPTER THREE
3.1 THE TEXT DISPLAYED BY THE SYSTEM
3.2 The Sketch of the System
3.3 Design Considerations
3.4 Functional Blocks
3.4.1 The Power Supply Functional Unit (PSU)
3.4.2 Micro-Processing Unit (MPU) 
3.4.3 The Circuit Display Inter-Face
3.4.4 The Massage /Letter Spelling Display Unit
3.5 Display Pattern
3.6 Measures for Data Collection

CHAPTER FOUR
4.1 MAIN APPARATUS USED (WITH THE DIAGRAMS)
4.1.1 Microprocessor
4.1.2 Decoder
4.1.3 Crystal Oscillator
4.1.4 Voltage Regulator
4.1.5 Light Emitting Diodes (LEDS)
4.1.6 Transistors
4.1.7 Resistors
4.1.8 Capacitors 
4.1.9 Transformer
4.1.10 Diodes
4.1.11 Vero board 
4.1.12 Jumper wire
4.2 System Circuitry design
4.3 Principle of Operation/System Analysis
4.4 LED Arrangement /Lighting 
4.5 Program Design and Implementation 
4.6 Flow Chart
4.7 Testing
4.8 Problems/Difficulties/Limitations Encountered 
4.9 Precautions

CHAPTER FIVE
5.1 SUMMARIES
5.2 Conclusions
5.3 Recommendations
5.4 References

 

Download